H2K Ultimate Tank Tool

The H2K Tank Tool just got even better!

The H2K Ultimate Tank Tool is set to debut with two vent heads. The Standard vent matches the purging speed of the original Tank Tool, while the High Flow vent promises to halve that time.

Additionally, the tool boasts a magnetic bit holder with three included bits. The 5/32" and 1/8" hex bits are designed to handle most velocity adjustments on leading markers and fit the flush mount burst discs on widely used regulators. The PH2 Phillips bit is a versatile addition for various gear disassembly requiring a Phillips screwdriver.

Completing the Ultimate Tank Tool's new features is the paintball case nub located at the wrench end of the tool. This nub is not only ideal for opening new cases of paint but also doubles as a makeshift flathead wrench.

Instructions:

• Drain all air from your compressed gas cylinder by threading in the tank threads into the Tank Pressure Release cavity.
  
• Confirm that no pressure is present in the cylinder, pressure gauge reads zero psi, and you can easily press the tank pin with your finger with no air releasing.
  
• Insert fill reg nipple removal slot over the tank fill nipple and rotate by hand, DO NOT APPLY FORCE WITH ANY OBJECT TO THE TANK TOOL AT ANY TIME. DO NOT STRIKE WITH OBJECT, USE BY HAND ONLY.
  
• Slowly remove tank regulator by threading counter clockwise

Disclaimer: The Tank Tool is not a toy. Please advise prior to use that all air should be vented from your air tank and zero psi should remain into tank prior to removal of any air tank regulator. Use at your own risk and follow all instructions for proper use. Always wear proper eye protection and hand protection when using the Tank Tool to prevent injury. Never apply force with any object or strike the Tank Tool with any object to attempt to remove your regulator.