Autococker Parts & Accessories
$49.95
The same outrageous performance as our original bomb, but with an updated look. Years ago Danny Love discovered that by adding a third o-ring to the shaft of a 4-way he could shorten the...
- Black
- Clear
$59.95
Rams have been manufactured by companies such as Clippard for many years before paintball came along. While others made these rams work with their guns we decided to make our ram specifically for paintball....
- Black
- Clear
$64.95
Danny worked closely with our good friend David Galsworthy (deceased), the founder of Sterling / Proline to produce a low pressure regulator (LPR) that will work under the most adverse conditions. With a massive...
- Black
- Clear
$24.95
Everybody breaks paint in their gun at some point or another. Excess paint or corrosion can make your ball detent jam up, making your gun not work at the worst possible time. The Shocktech...
- Black
$39.95
Its back and just as good as it always was. The original low pressure valve. The Rat Valve allows incredible air flow consistency. You'll see tighter groupings on the field and at the chrono....
$39.95
The Phat Hammer incorporates a 2-piece body design, a stainless steel front for durability and a brass body for extra weight to hit the exhaust valve harder, allowing you to run at lower pressures....
$8.95
Keep your Autococker up and running with the Shocktech Valve & Hammer Spring Set
$16.95
Shocktech timing rod has a threaded rod and coupler to endure precise increments in timing are not only attainable but can then be securely preserved. Lock down the two grub screws when you're done...
$49.95
The New Dye DFF-20 Autococker valve from DYE is a DYELAB secret project that we referred to internally as code name “Lazarus valve”. With years of Autococker tuning and high-level valve experience our talented...
$12.95
The Shocktech Cocking Rod is made with an adjustable knob broached for use with a 3/16ths allen key to help in precision timing. The rod can be locked in with the same allen wrench...
$14.95
Keep your Shocktech Bomb 3-Way up and running with this replacement shaft with factory o-rings already installed
$299.95
Danny has taken all the play out of a traditional .45 slide while maintaining the ability to still call it a slide. This has been achieved by getting away from the standard trigger, springs,...
- Black
$4.99
The Shocktech Rounded Phat Hammer Screw is a 1/4x28 hardened lug w/ nylon set screw
$34.95
Old school classics meet modern performance. The all-new DFF-20 Beavertail for the Autococker, a collaborative project between the designers at DYE LAB and Freeflow Technology. Features: Premium machining Fits almost all Autococker 45 Degree...
- Black
$89.95
Old school classics meet modern performance. The all-new DFF-20 Hyper Regulator for the autococker, a collaborative project between the designers at DYE LAB and Freeflow Technology. Features: Proven Hyper Reg performance Pressure downstream bleed...
- Black
$9.95
The Shocktech SS IVG is made to fit all threaded body cockers with the original valve style.
$39.95
Old school classics meet modern performance. The all-new DFF-20 Lockdwn Feedneck for the Autococker, a collaborative project between the designers at DYE LAB and Freeflow Technology. Features: Double clamp design Fits standard autococker feedneck...
- Black
$49.95
Our latest version of a roller sear takes today’s customer needs into account more than any other sear on the market. There are dozens of manufacturers that have made their own .45 frames, triggers,...
$79.95
Old school classics meet modern performance. The all-new DFF-20 Low Pressure Reg (LPR) for the autococker, a collaborative project between the designers at DYE LAB and Freeflow Technology. Features: Shared reg seat with M3,...
- Black
$89.95
Years ago we tried out every Inline Regulator we could get our hands on. We felt that CP made the best so we hit them up for a private label version. Their internals to...
- Gloss Black
$4.95
These are the original size and more importantly the exact durometer Danny decided we needed years ago. These are the only o-rings that will make your Shocktech cocker and/or Shocktech bomb run the way...
$129.95
Old school classics meet modern performance. The all-new DFF-20 Beavertail for the Autococker , a collaborative project between the designers at DYE LAB and Freeflow Technology. Features: Legendary Dye UL 45 Frame Premium Machining...
- Dust Black
$49.95
Old school classics meet modern performance. The all-new DFF-20 3-way for the autococker, a collaborative project between the designers at DYE LAB and Freeflow Technology. Features: Industry first slotted porting for high airflow and...
- Black
$24.95
Keep your Autococker up and running with the Inception Designs Autococker 2K+ Banjo Bolt This is an autococker banjo bolt. They are made from stainless steel and machined out as much as possible to...
$49.95
The Shocktech Super Fly Bolt combines our modified 3 hole venturi design with a cupped tip to cradle the ball. The autococker bolt has an aluminum center section for strength and a delrin tip...
$79.95
Keep your Autococker up and running with the Inception Designs Low Pressure Regulator (LPR) Features: This is the high end LPR (Low Pressure Regulator) from Inception Designs. Comes with barb. It's a balanced regulator...
- Gloss Black
$69.95
GTR | RAM "Gentle Touch Ram" - Probably the greatest Autococker ram ever made! It's simply brilliant! This is the high end fully re-buildable ram that will work on all new and old school...
- Gloss Black
$49.95
The Inception Designs UFC 3-Way is the latest, most modern three way on the market. It has all of the greatest features combined into the smallest package possible so that it will fit on...
- Gloss Black
$39.95
A high flow gas block screw couples to an air chamber reservoir giving your mini cocker as much air behind the valve as it will ever need. Under fast, sustained strings of paint the...
- Black
$49.95
Keep your Autococker up and running with the Nova 9/16 Pressure Balanced Autococker Valve. This valve will work on any Autococker that uses the 9/16" valve size
$199.95
These are slide frames that will fit on any Autococker or Sniper (including all Inception, Empire and WGP guns)
- Dust Black
- Gloss Black
$179.95
Keep your Autococker up and running with the Inception Designs Pneumatics Set! This a high end set of all the front block pnuematics needed for an Autococker. Included is the following: 1 Inception Designs...
- Black
Autococker Parts & Accessories
An Autococker is a type of paintball marker, also known as a paintball gun, that was first introduced in the late 1980s. It gets its name from its unique cocking mechanism that automatically cocks the gun's hammer after each shot, allowing for faster firing and reduced recoil.
Autocockers are important in paintball because they offer a level of customization and precision that other markers do not. They are highly customizable with aftermarket parts, which allows players to fine-tune their marker to their specific playing style and preferences. This includes upgrades like different barrel lengths, trigger frames, regulators, and more.
In addition to customization, Autocockers are known for their accuracy and reliability. Their closed bolt design and precision machining make them highly accurate, while their high-quality materials and construction ensure that they are durable and reliable even in harsh playing conditions.
Overall, Autocockers are a popular choice among serious paintball players who demand high performance and reliability from their equipment.
Shocktech
Shocktech is a well-known brand in the paintball industry that specializes in manufacturing high-end upgrades and accessories for Autococker markers. Shocktech regulators are well made and durable pieces of equipment that are sure to last for several years of paintball play.
The low-pressure regulators like the Shocktech Low Pressure Regulator work under the most adverse conditions like cold weather. The large air chambers that come with most shocktech pneumatics provide a smooth and controlled flow of air into for a consistent shot. The regulators are easy to maintain, especially with the pin assemblies. Shocktech was also the pioneer of the three O-ring style on the shaft of a four-way which made shots quicker, snappier, and resulted in less recoil. The Shocktech Bomb II 3-way is a great option for autocockers.
Inception
Inception autococker products were developed out of a necessity to transform the way that paintball was played with autocockers. Inception saw an opportunity to enhance the performance of autococking markers with streamlined and highly functional parts.
For players building out their own autococker or for those who need to maintain a number of different parts, the Inception Designs Pneumatics Set is a great option. It comes with all of the hardware necessary to set up front block pneumatics on an autococker which works for both new school and old school autocockers. The Inception Designs UFC 3-Way is also one of the most modern three-ways on the market and is made to be as small as possible to fit on even the largest front block LPRs.
Dye
Dye autococker products are just like anything else that Dye makes–high end, high quality, and able to go the distance. For many of the autococker products, Dye partnered with freeflow technologies to bring a modern design to classic paintball technology. Dye’s Low Pressure Regulators are an excellent option as is the Hyper Regulator which has an operating pressure of anywhere between 50 PSI to 375 PSI. Players love these products because of their high quality and reliability.
